Many people are handy enough around the house that they have no trouble with easy electrical projects. They can replace a faulty switch, change a damaged outlet cover, and replace a ceiling fan with a light fixture. Some projects, however, should be handled by professional Residential Electricians in Lake Tapps Wa for safety reasons.
Adding New Outlets
Taking off an old outlet cover and putting on a new one is an easy task for most people. However, adding new outlets to a room should be done by Residential Electricians in Lake Tapps Wa. The wiring has to be modified after cutting into the wall.
When household residents are relying on extension cords because they don’t have enough wall receptacles, it’s time to get new outlets installed with additional wiring. These people are probably putting too heavy a load on one or more outlets by adding more equipment attached to extensions.
Installing Dimmer Switches
These convenient devices allow people to reduce the brightness of light bulbs as they wish. The tactic does not save as much money on electricity as installing lower-wattage bulbs does, but sometimes people want the extra brightness. They mainly want dimmer switches to they can easily adjust the lighting ambiance in certain rooms.
Replacing Outlets With GFCI Receptacles
If the house is older, it may not have any outlets that are categorized as ground fault circuit interrupter models, or GFCI. Newer homes have one of these outlets on any line where water enters the house through plumbing. An electrician can replace one or more standard receptacles with a GFCI unit. It shuts off electricity if water makes contact with an electrical device.
Complete House Rewiring
Rewiring of an older home is one of the biggest residential electrical projects, and only professionals from a company like Kraft Electric should be doing this work. Upgrading the electrical panel is done at this time, which commonly involves replacing a fuse box panel with a breaker box. Extra wiring and breakers can be added for current and future use. Labeling should be done to identify which part of the house each breaker, and sometimes a specific appliance, is connected to.
