Water heaters are common household devices powered by fuel, electricity or solar energy that heat pipe water during winters and keeps it warm for domestic or commercial purposes. Depending upon the type of usage and quantity of water that needs to be heated, these devices may come in different shapes and sizes. Also, they may be working on different principles. Electric water heaters in Charlotte, NC, are the most demanded appliances in all sectors.
Like all other mechanical devices, even the water heaters tend to malfunction at times. High water pressure or leakage of gas creates risky issues at home. It may damage your electrical and plumbing system as well as risk your health and family security. In such cases, natives need the help of professional water heater repair services in Charlotte, NC.
However, sometimes it is not possible to contact the professionals especially when an electric heater short circuits or a gad driven one causes leakage of gas. In such cases, the damage needs to be repaired at ones. Therefore, home owners should possess moderate experience in handling electronic appliances. Additionally, they can watch online tutorials or go through the user manual in order to repair their heating device.
Check out these self-help water heater repair tips to fix Charlotte, NC based domestic electric heating systems.
– First of all, put on your rubber gloves and boots.
– Secondly, inspect the thermostat of the heating device very carefully. Check whether you have sufficient water to last for a day. If the water is still cold, you can raise the temperature slightly. Don’t turn it up instantly or it will cause skin blistering upon usage.
– If the device fails to work, turn off electric power, shut down the incoming water supply and drain the tank by opening drainage valve. It is present right at the bottom of the machine. This will drain clogged impurities present inside the appliance.
– Check the leakage in drain valves. You can use pliers to fix loose valves. If the water continues to leak, replace the leaking valve with a new one. Now switch off the thermostat and verify the state of pressure release valve. Check issues in it.
– Next, test the pipelines for leakage or clogging. Open up the tank to check for sedimentation or condensation. The storage tank should be well ventilated to prevent water drainage.
– Immediately replace the pressure relief valve of your heater if it shows any signs of damages. Subsequently, install a new pressure relief valve along with a drain pipe.
– If there are no leakage or pressure issues and it continues to produce cold water or lukewarm water, you can replace either of the two heating elements of the device. The top component needs to be replaced if the device is producing lukewarm water and the bottom one needs to be substituted if it produces cold water.
– Once you finish up with the process, regulate the temperature of the thermostat. Fill water inside the tank and restore the power supply. Test the device.
If the problem is still persistent, you must reach the nearest water heater repair agency in Charlotte, NC or get a new heater if the earlier device is completely damaged.
