Whether you’re considering getting a top hat ice maker or a Crescent Cuber Ice Maker – KM-320MAH, you’ll need to know how these machines work. That way, you’ll know how to fix them (and who to call) in case they break. In this article, we’ll give you a basic run-down on how these pieces of equipment work.
The Basic Set-Up
Icemakers are basically an automated assembly-line version of the ice making process most of us are familiar with at home. You’d normally pour water into a mold and stick it in the freezer until the water turns into solid ice cube. Most of these machines make use of a sturdy electric motor, as well as a water valve powered by electricity. It’ll also come with an electrical heating unit. To power the ice maker, you first have to plug it into your refrigerator’s power circuit. Then, you need to connect the water-intake line to a plumbing line in your house, according to How Stuff Works.
How It Works
Your ice maker goes through several cycles. First, a switch in your circuit will open a solenoid water valve by sending a current to it. The valve opens for about seven seconds, letting in as much water as needed to fill up the water mold. Then, the machine will let the water freeze solid. Once the machine detects a certain temperature level, the thermostat closes another switch in the circuit, sending power to a heating coil under the ice maker. This will heat up the bottom of the mold, loosening up the ice cubes. Then, the circuit will power up the motor, activating ejector blades that will revolve and take out the ice cubes from the mold.
We hope that this article has given you a better idea of how these fine machines work. If you’re looking for a great Crescent Cuber Ice Maker – KM-320MAH, make sure you check all of its components before finalizing the purchase. You’ll be sure to get the best value for your money that way.
